Crate Bumper

1. 1

   Place the Bumper in the Crate:

   Start with the back 2 corners. The vertical stitching should fit the back corners.

2. 2

   Secure the Velcro Straps:

   The Velcro is at the top of the bumper. Attach the Velcro around the back corners. The velcro straps must rest on a horizontal bar to prevent them from sliding down.

3. 3

   Position the Side Panels:

   Next, bring the sides of the bumper to the front of the crate. Attach all 9 pieces of Velcro. Make sure the space between the Velcro is taut.

Single Door

Crate Cover

1. 1

   Place the Cover on the Crate:

   Our unique design has No seams on the top of the cover.

2. 2

   Align the Back Seams:

   There are 2 vertical seams that line up in the back of the crate NOT on the top.

3. 3

   Secure the Front Corner Ties:

   Attach the ties to the bar under the crate pan so they are out of reach from your dog.

Double Door

Crate Cover

1. 1

   Place the Cover on the Crate:

   The vertical zippers will line up with the front and side doors.

2. 2

   Secure the Front Corner Ties:

   Attach the ties to the bar under the crate pan so they are out of reach from your dog.

3. 3

   Secure the Rear Corner Tie:

   Next, attach the tie in the rear corner that has the zipper. The opposite rear corner is sewn closed and has no tie.